The Order Selection and Lot Sizing Problem in the Make-to-Order Environment

Authors

Zhongping Zhai, Florida International UniversityFollow

Document Type

Dissertation

Degree

Doctor of Philosophy (PhD)

Major/Program

Please see currently inactive department below.

Major/Program

Industrial and Systems Engineering

First Advisor's Name

Chin-Sheng Chen

First Advisor's Committee Title

Committee Chair

Second Advisor's Name

Purushothaman Damodaran

Third Advisor's Name

Tao Li

Fourth Advisor's Name

Shih-Ming Lee

Keywords

order selection, lot sizing, job shop scheduling, production planning

Date of Defense

3-4-2011

Abstract

This research is motivated by the need for considering lot sizing while accepting customer orders in a make-to-order (MTO) environment, in which each customer order must be delivered by its due date. Job shop is the typical operation model used in an MTO operation, where the production planner must make three concurrent decisions; they are order selection, lot size, and job schedule. These decisions are usually treated separately in the literature and are mostly led to heuristic solutions.

The first phase of the study is focused on a formal definition of the problem. Mathematical programming techniques are applied to modeling this problem in terms of its objective, decision variables, and constraints. A commercial solver, CPLEX is applied to solve the resulting mixed-integer linear programming model with small instances to validate the mathematical formulation. The computational result shows it is not practical for solving problems of industrial size, using a commercial solver.

The second phase of this study is focused on development of an effective solution approach to this problem of large scale. The proposed solution approach is an iterative process involving three sequential decision steps of order selection, lot sizing, and lot scheduling. A range of simple sequencing rules are identified for each of the three sub-problems. Using computer simulation as the tool, an experiment is designed to evaluate their performance against a set of system parameters.

For order selection, the proposed weighted most profit rule performs the best. The shifting bottleneck and the earliest operation finish time both are the best scheduling rules. For lot sizing, the proposed minimum cost increase heuristic, based on the Dixon-Silver method performs the best, when the demand-to-capacity ratio at the bottleneck machine is high. The proposed minimum cost heuristic, based on the Wagner-Whitin algorithm is the best lot-sizing heuristic for shops of a low demand-to-capacity ratio. The proposed heuristic is applied to an industrial case to further evaluate its performance. The result shows it can improve an average of total profit by 16.62%. This research contributes to the production planning research community with a complete mathematical definition of the problem and an effective solution approach to solving the problem of industry scale.

Identifier

FI11042703

Recommended Citation

Zhai, Zhongping, "The Order Selection and Lot Sizing Problem in the Make-to-Order Environment" (2011). FIU Electronic Theses and Dissertations. 364.
https://digitalcommons.fiu.edu/etd/364